MENU
UNIEPAL-DREW® AQUA 1-K
Fire-resistant varnish for wooden floors
DESTINY:
UNIEPAL-DREW AQUA 1-K water-borne polyurethane varnish is designed for fire-retardant protection and decorative finishing of wooden surfaces made of wood species domestic, OSB boards, plywood and wood-based materials used indoors residential and public utilities. The varnish has a high hardness and abrasion resistance which makes it possible application on floorings, parquets, stairs, furniture in public utility premises.
Products coated with UNIEPAL-DREW AQUA 1-K lacquer in an amount of at least 200 g / m2, have been categorized
in terms of fire resistance: wood of all kinds (except exotic wood) and products wood with a thickness of at least 12 mm - as non-inflammable (B-s1, d0), floor made of wood of any type (except for exotic wood) with a thickness of at least 12 mm - as hardly flammable (Bfls1).
Permissible value of maximum VOC content below 130 g / l in a ready-to-use product. Content VOC in the product below 130 g / l.
PREPARATION OF SUBSTRATE:
Fill any surface defects, clean, degrease and dust the substrate.
UNIEPAL-DREW AQUA 1-K should be applied only to surfaces made of raw wood o relative humidity not exceeding 20%. After drying, the varnish creates a satin coating. surfaces made of oak wood additionally require the application of a nitrocellulose or alcohol base.
UNIEPAL-DREW AQUA 1-K has an EUROPEAN TECHNICAL ASSESSMENT.
APPLICATION:
UNIEPAL-DREW® AQUA 1-K
Fire-resistant varnish for wooden floors
DESTINY:
UNIEPAL-DREW AQUA 1-K water-borne polyurethane varnish is designed for fire-retardant protection and decorative finishing of wooden surfaces made of wood species domestic, OSB boards, plywood and wood-based materials used indoors residential and public utilities. The varnish has a high hardness and abrasion resistance which makes it possible application on floorings, parquets, stairs, furniture in public utility premises.
Products coated with UNIEPAL-DREW AQUA 1-K lacquer in an amount of at least 200 g / m2, have been categorized in terms of fire resistance: wood of all kinds (except exotic wood) and products wood with a thickness of at least 12 mm - as non-inflammable (B-s1, d0), floor made of wood of any type (except for exotic wood) with a thickness of at least 12 mm - as hardly flammable (Bfls1).
Permissible value of maximum VOC content below 130 g / l in a ready-to-use product. Content VOC in the product below 130 g / l.
PREPARATION OF SUBSTRATE:
Fill any surface defects, clean, degrease and dust the substrate.
UNIEPAL-DREW AQUA 1-K should be applied only to surfaces made of raw wood o relative humidity not exceeding 20%. After drying, the varnish creates a satin coating. surfaces made of oak wood additionally require the application of a nitrocellulose or alcohol base.
UNIEPAL-DREW AQUA 1-K has an EUROPEAN TECHNICAL ASSESSMENT.
APPLICATION:
UNIEPAL-DREW® AQUA 1-K
Fire-resistant varnish for wooden floors
DESTINY:
UNIEPAL-DREW AQUA 1-K water-borne polyurethane varnish is designed for fire-retardant protection and decorative finishing of wooden surfaces made of wood species domestic, OSB boards, plywood and wood-based materials used indoors residential and public utilities. The varnish has a high hardness and abrasion resistance which makes it possible application on floorings, parquets, stairs, furniture in public utility premises.
Products coated with UNIEPAL-DREW AQUA 1-K lacquer in an amount of at least 200 g / m2, have been categorized in terms of fire resistance: wood of all kinds (except exotic wood) and products wood with a thickness of at least 12 mm - as non-inflammable (B-s1, d0), floor made of wood of any type (except for exotic wood) with a thickness of at least 12 mm - as hardly flammable (Bfls1).
Permissible value of maximum VOC content below 130 g / l in a ready-to-use product. Content VOC in the product below 130 g / l.
PREPARATION OF SUBSTRATE:
Fill any surface defects, clean, degrease and dust the substrate.
UNIEPAL-DREW AQUA 1-K should be applied only to surfaces made of raw wood o relative humidity not exceeding 20%. After drying, the varnish creates a satin coating. surfaces made of oak wood additionally require the application of a nitrocellulose or alcohol base.
UNIEPAL-DREW AQUA 1-K has an EUROPEAN TECHNICAL ASSESSMENT.
APPLICATION:
Technical Documentation
CONSTRUCTION AND RENOVATION
Fire protection of wood
Awards and prizes: