MENU
BIO FOREST OIL
Multigrade oil for the lubrication of cutting systems
FEATURES:
BIO FOREST OIL is a specially selected set of ingredients that make this oil stand out very good lubricating and preservative properties. It has a large ability to wash out the resin pine, is characterized by low drying, lack of sealing (does not seal the lubrication system), dampens vibrations and noise, especially in the lower frequency ranges.
APPLICATION:
BIO FOREST OIL is a multi-grade oil designed for the lubrication of cutting systems of all chainsaws available on the Polish market. Due to the origin of the oil (vegetable) base should be used by saws when working in forests, orchards and home gardens.
Due to its high biodegradability, it should be used wherever protection is required soil.
APPLICATION:
BIO FOREST OIL can be used in modern chainsaws equipped with in an oil pump with regulated output as well as without regulation, in lubrication systems with direct drive from the clutch drum as well as the crankshaft, automatically lubricated and by means of a manual pump.
PRECAUTIONS:
The oil is not toxic and dangerous for people. All components (both base oil and additives) are vegetable origin. Apply the regulations, rules and requirements of BPH and fire protection suitable for work with this product written down in the product safety data sheet prepared by the manufacturer.
STORAGE AND TRANSPORT:
BI0 FOREST OIL can be stored in metal containers, PE or pallet, clean - especially inside, tightly closed at a temperature not lower than -10 ° C. The container must be protected against direct sunlight away from sources of heat and open fire. You can transport any means of transport at a temperature not lower than -10 ° C. It is not subject to the provisions of ADR.
BIO FOREST OIL
Multigrade oil for the lubrication of cutting systems
FEATURES:
BIO FOREST OIL is a specially selected set of ingredients that make this oil stand out very good lubricating and preservative properties. It has a large ability to wash out the resin pine, is characterized by low drying, lack of sealing (does not seal the lubrication system), dampens vibrations and noise, especially in the lower frequency ranges.
APPLICATION:
BIO FOREST OIL is a multi-grade oil designed for the lubrication of cutting systems of all chainsaws available on the Polish market. Due to the origin of the oil (vegetable) base should be used by saws when working in forests, orchards and home gardens.
Due to its high biodegradability, it should be used wherever protection is required soil.
APPLICATION:
BIO FOREST OIL can be used in modern chainsaws equipped with in an oil pump with regulated output as well as without regulation, in lubrication systems with direct drive from the clutch drum as well as the crankshaft, automatically lubricated and by means of a manual pump.
PRECAUTIONS:
The oil is not toxic and dangerous for people. All components (both base oil and additives) are vegetable origin. Apply the regulations, rules and requirements of BPH and fire protection suitable for work with this product written down in the product safety data sheet prepared by the manufacturer.
STORAGE AND TRANSPORT:
BI0 FOREST OIL can be stored in metal containers, PE or pallet, clean - especially inside, tightly closed at a temperature not lower than -10 ° C. The container must be protected against direct sunlight away from sources of heat and open fire. You can transport any means of transport at a temperature not lower than -10 ° C. It is not subject to the provisions of ADR.
Technical Documentation
PLANT CROPPING AND GARDEN
Awards and prizes: